Handhelds buying guide
If you want your PDA simply for organization, you may not need any special wireless connections. But it seems like everyone today wants to stay connected. Here are your options.
Infrared
(IR) ports are built in on most mainstream handhelds and are useful for
short-range (less than 30 feet), low-bandwidth data transfers, but you will need
a clear line of sight for the two devices to communicate with each other, as
with TV remote controls. If your laptop has an IR port, for example, you'll be
able to synchronize without a cradle or a cable--a particularly handy feature
for road warriors. And if your handheld is equipped with the proper software,
you can even use infrared to control your TV and other home entertainment
devices. ![]() Infrared ports allow short-range data transfer from your handheld to
another device, such as a laptop. This
short-range radio frequency (RF) technology operates on a 2.4GHz spectrum and
allows PDAs to communicate with other Bluetooth-enabled gadgets such as some
cell phones; thus, you can dial numbers straight from your handheld's contact
list or use your cell phone as a modem to check e-mail. You can also transfer
files, print to a Bluetooth printer, or sync with a Bluetooth-equipped computer.
Unlike IR, Bluetooth's RF signals can travel through clothing and other
barriers, meaning you can leave your phone in your pocket and still be connected
to your PDA. If the handheld doesn't come with the technology built in,
Bluetooth cards are available for the expansion slots--just be sure it supports
Secure Digital Input Output (SDIO), a mandatory feature when using a Bluetooth
SD card. With
a Wi-Fi-enabled handheld, you can connect directly to the Internet at high
speeds to check e-mail, browse the Web, and even access servers via secure
virtual private network (VPN) connections. Like Bluetooth, Wi-Fi runs on a
2.4GHz spectrum, and you need to be near (typically 75 to 300 feet from) an
access point in order to connect. If your PDA doesn't come with built-in Wi-Fi,
you can purchase Wi-Fi networking cards (usually in the form of SDIO cards) to get connected. Additionally, Wi-Fi
requires a lot of power and quickly drains most PDA batteries. ![]() No integrated Wi-Fi? No problem. With a Wi-Fi card and expansion slot,
you can connect to the Web in a flash. The majority of handhelds use the 802.11b standard, which is the same one found in most common public hot spots, such as cafes, businesses, and universities; it also transmits info at a speed of 11Mbps. Some of the new handhelds such as the Dopod 818 Pro comes with in-built 802.11g Wi-Fi. Wi-Fi
works great when you're close to a hot spot but not if you wander far and wide.
Instead, you should consider handhelds that use cellular data networks, although
not a lot are currently available. As with traditional cell phones, these
provide broad coverage, although you should expect more dead spots in the data
network than the voice network. Smart phones typically employ this method to
keep the device connected. Alternatively, a Bluetooth PDA with a separate
data-capable cell phone can achieve the same end. Downsides to consider are the
fact that you'll need to have a service contract with a wireless provider, and
download speeds are slower than on a wireless LAN (115Kbps vs. 11Mbps).
|
- Talkback
-



If you want your PDA simply for organization, you may not need any special wireless connections. But it seems like everyone today wants to stay connected. Here are your options.



