Home A/V at CES 2006
Don't be a square: Klipsch intros triangular subwoofers
The other new subwoofers in Klipsch's Reference line utilize a more conventional square/cube design and front-firing woofers. The RSW-10d (US$1,200) sports a 10-inch woofer and the same control panel, equalization modes, and IR input found on its triangular cousins. Rounding out the line are the RW-12d (12-inch woofer, US$700), RW-10d (10-inch woofer, US$500), and the only model without the top-side control panel and equalization modes: the entry-level RPW-10 (10-inch woofer, US$350). Credit: John P. Falcone, CNET.com Klipsch updates Reference Series speaker line
Highlights are as follows, boiled down from Klipsch's press release: Floor-standing speakers: The RF-83 (US$2,500 per pair) and RF-63 (US$1,800 per pair) will be available in either a cherry or black real wood veneer finish. Both feature three main drivers (8-inch woofers on the RF-83, 6.5-inchers on the RF-63). The RF-82 (US$1,000 per pair), RF-62 (US$800 per pair) and RF-52 (US$600 per pair) feature only two woofers. All of the new Reference towers utilize a "taller, narrower, and deeper" design that Klipsch touts as more modern (read: It will look swanky next to your new flat-panel TV).
Center-channel speakers: The center speaker handles nearly all the dialogue in a surround-sound configuration, and Klipsch has three new models to handle the job. The RC-64 (US$900) sports four 6.5-inch woofers and biwire inputs, and it's available in cherry or black real wood veneer finish. The smaller RC-62 (US$450) and RC-52 (US$300) utilize only two woofers.
Bookshelf speakers: Far smaller than the floor-standing towers, bookshelf models can be employed in smaller spaces, either as primary or surround speakers. The RB-81 (US$700 a pair) features a single 8-inch woofer and front-firing port; rear-firing ports, by contrast, would preclude placement in tight-fitting cabinets. The RB-61 (US$450 each pair) trades down for a 6.5-inch woofer but also includes the front-firing port, while the RB-51 (US$350 a pair) utilizes a 5.25-inch woofer.
Surround speakers: Klipsch's three new WDST (Wide Dispersion Surround Technology) speakers are intended for use as side- and back-surround speakers in a 5.1-, 6.1-, or 7.1-surround setup. They utilize a unique triangular design with each face of the wedge incorporating a woofer and horn tweeter. The result, according to Klipsch, is a 180-degree hemisphere of sound that more fully envelopes the listener. The RS-62 (US$1,000 a pair) uses dual 6.5-inch woofers, while the smaller RS-52 (US$700 per pair) employs dual 5.25-inch woofers. The more diminutive RS-42 (US$450 a pair) uses 4-inchers.
Credit: John P. Falcone, CNET.com | |||||||||||||||||
- Talkback
-





Floor-standing speakers: The RF-83 (US$2,500 per pair) and RF-63 (US$1,800 per pair) will be available in either a cherry or black real wood veneer finish. Both feature three main drivers (8-inch woofers on the RF-83, 6.5-inchers on the RF-63). The RF-82 (US$1,000 per pair), RF-62 (US$800 per pair) and RF-52 (US$600 per pair) feature only two woofers. All of the new Reference towers utilize a "taller, narrower, and deeper" design that Klipsch touts as more modern (read: It will look swanky next to your new flat-panel TV).
